P16 Full Color Outdoor LED Vedio Wall

Product Detail

Product	P16 Full Color Outdoor LED Vedio Wall
Module size	256*256mm
Pixel density	3906dots/m²
LED lamp	DIP346
Module resolution	16*16
Module consumption	40W/pcs
Viewing distance	16-160m
Max power consumption	650W/m²
Standard cabinet size	768*768mm
Drive mode	static
Brightness	=8000cd/m²
HUB mode	HUB40
Drive IC	FM5020
Frame frequency	?60Hz/s
Refresh rate	?360Hz/s
MTTF	>5000 hours
Life time	>100,000 hours
Defect rate	<0.0001
Video signal input	RF, S-video, RGB, RGBHV, YUV, YC, composition
Temperature range	Storage	-20 to 65°C
	Working	-20 to 50°C
Gray scale/color	4096 grades for R ,G and B
Display	=16.7M colors
Working voltage	110/220V AC
Viewing angle	Horizontal	110º
	Vertical	55º
Display content	videos, pictures and graphics
Operating humidity	10-90%
Storage humidity	10-90%
Continue working time	24 hours
Control mode	synchronization/asynchronization
Warranty	1 year
Module weight	1.05KG/PCS
Delivery time	7-15 days




     






    How to identify the advantages and disadvantages of LED display lamp beads?




    First: the brightness, that is, we usually say how much your lamp beads can achieve LM (lumens), LM (lumens) is a measure of the brightness of the lamp unit.




    Second: to see whether the uniform color is uniform, the quality of the light beads are very uniform light, the same color.Poor quality of the lamp beads will appear the phenomenon of a lamp beads bright, a lamp beads dark, luminous color mess is not uniform, there will be a clear dark area.




    Third: look at chip and chip size, the chip is the decisive factor in the quality of the lamp beads, under normal circumstances the greater the stability of the chip, the higher the brightness, the better heat dissipation.




    Fourth: pay attention to glue and phosphor, the general good products will use imported glue, the package of the lamp beads by hand without deformation, low-quality glue will be a deformation or even cracking and so on.




    Fifth: pay attention to the stent, the general situation for the silver-plated bracket bracket, silver-plated copper bracket is the advantage of rapid cooling, can be better to Can be better to decrease the lamp beads heat, resistance is small.




    Sixth: Note that the packaging process, good quality LED lamp beads uniform color, colloidal consistency is good. This is inseparable from a good machine equipment, production machinery and equipment is a key factor, good equipment can ensure that the product in the various procedures on the stability and consistency, to protect the product yield.




    In fact, the most important, or look at the lamp beads of the chip, the chip directly determines the color rendering index, brightness, anti-attenuation level.